Sleek and Simple Bedside Cabinets You Can Build

So, you've got a new bed, and you're ready to create the perfect cozy reading nook. But what about those bedside tables? Store-bought options can be pricey, and finding the perfect style and size can be a real struggle.

Don't worry! Building your own bedside cabinets is easier than you might think. You can create sleek and simple designs that perfectly match your bedroom decor, and with a little bit of DIY spirit, you can have unique, personalized furniture that reflects your style.

Here are some simple yet stylish bedside cabinet designs you can tackle yourself, with detailed instructions for each step. Let's get building!

Minimalist Modern Nightstand

This minimalist nightstand is perfect for a contemporary bedroom, featuring clean lines and a sleek, simple design. It's easy to build, even for beginners, and you can customize the wood type and finish to match your decor.

Materials You’ll Need

• Four 1x12 boards (for the sides and shelves)
• Two 1x12 boards (for the top and bottom)
• Wood glue
• Wood screws
• Wood stain or paint (optional)
• Sandpaper (various grits)
• Finishing oil or sealant (optional)
• Measuring tape
• Circular saw or miter saw
• Drill
• Clamps

Instructions

1. Cut your boards: Start by cutting the boards to size. For the sides, you'll need two pieces that are 16 inches high and 12 inches wide. For the shelves, you'll need two pieces that are 12 inches long and 11 inches wide. For the top and bottom, you'll need two pieces that are 16 inches long and 12 inches wide.
2. Assemble the sides: Using wood glue and screws, attach the two side pieces to the top and bottom pieces. Make sure the sides are flush with the edges of the top and bottom pieces. Clamp the pieces together while the glue dries.
3. Add the shelves: Once the sides are attached, use wood glue and screws to attach the two shelf pieces inside the cabinet, spaced evenly between the top and bottom.
4. Sand and finish: Once the glue has dried, sand the cabinet smooth with fine-grit sandpaper. You can then stain or paint the cabinet, or leave it natural. If you choose to stain or paint, apply a finishing oil or sealant to protect the wood.

Rustic Floating Nightstand

This rustic floating nightstand gives off a cozy and farmhouse vibe, perfect for a bedroom with a more relaxed aesthetic. It's a great way to add some character and functionality to your space without taking up too much floor area.

Materials You’ll Need

• One 1x12 board (for the shelf)
• Two 2x4 boards (for the supports)
• Wood glue
• Wood screws
• Wood stain or paint (optional)
• Sandpaper (various grits)
• Finishing oil or sealant (optional)
• Measuring tape
• Circular saw or miter saw
• Drill
• Clamps

Instructions

1. Cut your boards: Cut the 1x12 board to the desired length for your shelf. For the supports, cut two pieces of the 2x4 board to the height you want the shelf to be off the ground. Make sure to factor in the thickness of the shelf.
2. Attach the supports: Mark the locations on the wall where you want to attach the supports. Using a level, ensure the supports are plumb and even before drilling pilot holes. Attach the supports to the wall using appropriate wall anchors.
3. Attach the shelf: Once the supports are securely attached, place the shelf on top of the supports. Using wood glue and screws, attach the shelf to the supports. Ensure the screws are long enough to reach through the shelf and into the supports.
4. Sand and finish: Sand the shelf and supports smooth with fine-grit sandpaper. You can then stain or paint the shelf to match your bedroom decor. If you choose to stain or paint, apply a finishing oil or sealant to protect the wood.

Industrial Pipe Nightstand

This industrial pipe nightstand is a unique and modern addition to your bedroom. It's a great way to add a touch of industrial chic and functionality to your space.

Materials You’ll Need

• Four 1/2 inch black iron pipe fittings (for the legs)
• One 1/2 inch black iron pipe fitting (for the top support)
• Three 1/2 inch black iron pipes (for the legs)
• One 1/2 inch black iron pipe (for the top support)
• One 1/2 inch black iron pipe cap
• One 1/2 inch black iron pipe tee
• One 1x12 board (for the top)
• Wood glue
• Wood screws
• Wood stain or paint (optional)
• Sandpaper (various grits)
• Finishing oil or sealant (optional)
• Measuring tape
• Circular saw or miter saw
• Drill
• Pipe wrench
• Clamps

Instructions

1. Cut your boards: Cut the 1x12 board to the desired length and width for your top. You can choose a square or rectangular shape depending on your preferences.
2. Assemble the pipe frame: Screw the four pipe fittings into the bottom of the 1x12 board. Ensure the fittings are evenly spaced and secure. Using the pipe wrench, attach the three pipes to the fittings, making sure they are snug and secure. Connect the fourth pipe to the top support fitting, extending it to create a horizontal support bar across the top of the frame.
3. Attach the top: Once the pipe frame is assembled, attach the 1x12 top to the frame using wood glue and screws. Secure the top evenly and carefully.
4. Sand and finish: Sand the top smooth with fine-grit sandpaper. You can then stain or paint the top to match your bedroom decor. If you choose to stain or paint, apply a finishing oil or sealant to protect the wood.

Remember, these are just a few ideas to get you started. You can adjust the dimensions, wood types, and finishes to suit your individual needs and style. With a little creativity and some basic DIY skills, you can create a beautiful and functional bedside cabinet that you'll love for years to come.

Happy building!

Share: